The MI-4 is a traditional pin pointer, designed to be used by all detectorists at an attractive price, the MI-4 has the same specifications as the MI-6, without the DEUS / ORX radio connection.

"XP quality at a competitive price" - said ilovedetection.com

Retune

When operating, you can re-calibrate the pinpointer by briefly pressing the button while away from any metallic source.

On mineralized ground and salt water, it is advised to re-calibrate while in contact with the ground.

To obtain a precise target location, re-calibrate near to the object, the detection zone will now be reduced.

Waterproof pinpointer to 6 meters

Advantages

• Front and 360 ° detection
• 2 audio modes (Pitch/Pulse)
• 6 programs and 3 levels of sensitivity
• Speaker & vibrator and/or led deactivatable = very long autonomy
• One button to control everything
• Quick retune
• Ergonomic design and rubber
• Totally replaceable parts
• Rotary holster and strap with stainless steel rings

Specifications

• Rechargeable lithium polymer battery
• Detection frequency: 12 kHz
• Sensitivity: 3 levels + retune
• Led/vibrator/audio: ON/OFF
• Audio mode: PULSE or PITCH
• Holster, strap and charging cable included
• Waterproof to 6 meters
• Dimensions: W: 24 cm - D: 3.8 cm
• Weight: 170 gr
• Temperature of use: - 5°C to + 40°C
• Temperature allowed under load: 0°C to + 35°C
• 2 years warranty
• Made in France

The MI-6 is the first pinpointer on the market to offer wireless connectivity to your XP DEUS II, DEUS or ORX detector.

“If you have the XP DEUS II, DEUS or ORX, then you should have the MI-6 pinpointer. This is the best detector & pinpointer combination available.” - said Gary Blackwell

Wireless link between Pinpointer and your detector

Thanks to the wireless link between your MI-6 and your XP DEUS II, DEUS or ORX detector you can:

• Adjust the sensitivity of your pinpointer from your detector's remote control
• Hear the signals from your pinpointer in your headset
• Locate your lost pinpointer, even if switched off
• View the location chart on your remote control
• Adjust the tone of your pinpointer
• Check the settings of your pinponter on your remote control

MI-6 is a waterproof Pinpointer up to 6 meters

Settings and display on the DEUS II, DEUS or ORX of the MI-6 extended functions:

• 50 levels of sensitivity
• Adjustable tones
• 2 audio modes
• Battery level
• 4 programs
• Lost MI-6 search mode (even off and after several weeks)

Specifications

• Audio signal transmitted directly to the DEUS II, DEUS or ORX via wireless link
• Interference suppression between MI-6 and XP DEUS or ORX
• Water resistant to 6 meters
• Rechargeable lithium polymer battery
• Detection frequency: 12 kHz
• Sensitivity: 3 levels (up to 50 if connected to DEUS or ORX) + retune
• Led/vibrator/audio: ON/OFF
• Audio mode: PULSE or PITCH
• Holster, strap and charging cable included
• Dimensions: W: 24 cm - D: 3.8 cm
• Weight: 170 gr
• T° of use: - 5°C to + 40°C
• T° allowed under load: 0°C to + 35°C
• 2 years warranty
• Made in France